Application
LiYY (TP) is applicable in the short runs and tight spaces, where the main requirements are smaller outer diameter and bending radii.
These cables ideally meets these requirements.
Specifications
Standard : Based on VDE 0812
Nominal Voltage (Not for power application) : 0.14 mm² = 350 V; >/= 0.25 mm² = 500 V
Insulation Resistance : Min. 20 GΩ x cm
Temperature Range : Flexing -5°C to +70°C. Fixed installation -30°C to +70°C
Minimum Bending Radius : For flexible use 10 x cable ø
Test Voltage : Up to 0.25 mm² = 1200 V. From 0.34 mm² = 2000 V
Breakdown Voltage : Up to 0.25 mm² = 2400 V
From 0.34 mm² = 4000 V
Cable Construction
Bare copper, fine wire conductors, to DIN/BS EN 60228 cl.5.
Conductor make-up for
0.14 mm² = 18 x 0.10 mm.
0.25 mm² = 14 x 0.15 mm.
0.34 mm² = 19 x 0.15 mm.
Core insulation of special PVC TI2 EN 50363-3.
Core colours as per DIN 47100.
Pairs stranded in layers with optimal lay-length.
Outer sheath of special PVC, TM2 to EN 50363-4.1.
Colour grey (RAL 7032).
Properties
PVC self-extinguishing and flame retardant according to EN 60332-1-2.
Capacitance (approx. Value)
Up to 0.5 mm² – 120 nF/km
Above 0.5 mm² – 160 nF/km
Inductance : Approx. 0.65 mH/km